Structural anchor selection: verifying the substrate before you drill
Most structural fixing failures are not anchor failures. They are wrong-substrate failures — the anchor was rated for a material the base was never made of, or the material behind the face was not what the drawings assumed.
10 min read
Topic
Structural
Articles and news about Structural for Australian builders.
Structural anchor selection: verifying the substrate before you drill
Most structural fixing failures are not anchor failures. They are wrong-substrate failures — the anchor was rated for a material the base was never made of, or the material behind the face was not what the drawings assumed.
10 min read
Brickwork movement joints, ties and articulation on NSW residential jobs
Masonry moves. Movement joints, correctly specified ties and articulation at the frame give it somewhere to go, and the defects that follow when they do not are expensive and slow to appear.
12 min read
Sensor monitoring for concrete curing and early age strength
Curing sensors do not make concrete stronger. They tell you when the concrete you have already placed is strong enough to strip, load or stress, so you can stop guessing with the programme and start deciding with evidence.
12 min read
Nail plates, cyclone washers and fixing schedules for timber frames
The fixing schedule tells you what holds the frame together. If you only read it after the plasterboard goes on, you are relying on someone else’s work with no way to check it.
15 min read
Formwork stripping times for residential slabs, beams and walls
Stripping formwork is a decision about load, not a decision about the clock. The rules differ for slab soffits, beam sides and soffits, and wall panels, and cold weather shifts all of them.
12 min read
Strip footings and pad footings for NSW residential work: setout, reinforcement and what inspectors check
Strip and pad footings carry load in different ways, and the choice is usually settled by the soil profile and the site, not by habit. What matters on the day is setout accuracy and reinforcement that stays where it was designed to be.
11 min read