Skip to content
  • NSW-first CPD, built by a practising builder
  • Instant PDF certificates
  • Unlimited assessment attempts
  • 12 points a year, sorted
  • 15% off your first order — get your code
  • Content aligned to the NCC 2022
(02) 8006 5827 Log in Get started
NSW · 3 points

Performance Solutions and Condensation: How NCC Compliance Gets Proved

Most builders think a Performance Solution is something for fire engineers on commercial jobs. It shows up on ordinary residential work more often than that — and condensation management, now its own explicit NCC requirement, is one of the clearest places it happens. Learn how the compliance pathway actually works, and how to prove it.

  • Technical issues
  • Phone-friendly, progress saves as you go
  • Assessed — unlimited attempts
  • PDF certificate on completion

Buy this course · $49.00 or save with a points pack

You'll learn: Explain how a Performance Solution relates to the Deemed-to-Satisfy Provisions, choose and document an appropriate assessment method, recognise when a design departs from the DTS Provisions for condensation management specifically, and know what documentation a Performance Solution needs to actually hold up.

  • NSW: 3 points (Technical issues)

What’s inside

  1. About this course
  2. the question every Performance Solution answers
  3. What a Performance Solution actually is
  4. The assessment methods available
  5. Documentation: why an undocumented Performance Solution is not really one
  6. Working with the certifier and consultants
  7. Worked example: the raked ceiling with no roof space
  8. Building and site characteristics that actually matter
  9. Same design, different site: why context changes the answer
  10. Condensation management as its own Performance Requirement
  11. What compliance actually requires you to demonstrate on a real job
  12. Common mistakes and the commercial stakes
  13. Renovations, existing buildings and Performance Solutions
  14. Recap

Plus 6 knowledge checks, 2 site scenarios, 1 drag-and-drop task and an assessment at the end.

Reviewed by a NSW building practitioner.

Buy this course — $49.00

Doing your full renewal?

At this course's rate, 12 points costs about $196.00. The 12 CPD Points pack is $169.00 — save $27.00, and spend the points on any courses you like.

See the point packages →

Already have an account? Log in and your points balance shows here.

Disclaimer

The information provided in this course has been prepared using best endeavours to ensure that it is accurate, current and relevant at the time of publication. However, building legislation, regulations, standards, codes, policies and their interpretation may change over time and, in some circumstances, may be subject to interpretation or vary depending on the specific circumstances of a project.

The information provided is intended as general educational guidance only and should not be relied upon as a substitute for project-specific professional advice or verification.

Builders, contractors and other industry professionals are encouraged to independently verify the applicable requirements for each project, including the relevant legislation, regulations, standards, approvals and authority requirements, having regard to the specific site, building, construction method and circumstances.

PointCPD makes no representation or guarantee that the information provided will be applicable to every project or circumstance and recommends that participants seek appropriate professional or regulatory advice where clarification is required.